Dental Scalers
Send a Scaler Pattern List
Dental hand scalers are quoted from your pattern list, not chosen from product cards. Name the family first, then the full figure, so each line identifies one complete instrument.
- Scaler family: sickle, Jacquette, hoe, periodontal file or implant-maintenance hand instrument
- Named pattern and full figure, for example H6/H7 or Jacquette 30/33
- Working ends and working-end material
- Terminal shank and handle
- Quantity for each exact pattern and figure
- Packaging and destination
Pattern names describe your requirement and are not product listings. Powered scaler tips are components for a specified powered system and belong on a separate request.
Request a scaler quoteCompare scaler families and build your pattern list
Name the family from the working end first, then write each instrument as one complete line.
Scaler or curette: compare the working end
The schematic shows the quickest way to tell the two apart: a sickle ends in a pointed toe with a triangular cross-section, while a curette ends in a rounded toe with a semicircular cross-section. The drawings are schematic and do not show the exact geometry of any specific instrument.
If your list names a pointed-toe pattern such as H6/H7 or 204S, request it here. If it names a Gracey or a universal curette such as Columbia or McCall, request it from the curette subcategories instead. Universal patterns are listed under Universal curettes.
| Family | Working end | Example names |
|---|---|---|
| Anterior and posterior sickle | Pointed toe, triangular cross-section | H6/H7, Morse 0/00, U15/30, 204S |
| Jacquette | Sickle form named by a figure pair | Jacquette 30/33, 34/35 |
| Hoe | Single straight cutting edge set at an angle to the shank | Hoe 7/8 |
| Periodontal file | Series of small cutting surfaces on its head | Hirschfeld file 3/7 |
| Implant-maintenance hand instrument | Working-end material confirmed for the exact reference | Name the exact reference you use |
| Curette (separate category) | Rounded toe, semicircular cross-section | Gracey; universal patterns such as Barnhart, Columbia, Langer, McCall |
| Powered scaler tip (separate request) | A component for a specified powered system | Name the system and the tip reference |
Sickle and curette working ends compared. Schematic views, not actual size.
- Sickle scaler
Pointed tip. The cross-section is triangular.
- Curette
Rounded tip. The cross-section is semicircular.
Example request line
Reusable template: Family: ______. Named pattern and full figure: ______. Working ends: ______. Working-end material: ______ (if it matters for your use). Terminal shank and handle: ______ (or attach a photo of your current instrument). Quantity: ______ complete instruments. Packaging: ______. Destination country: ______.
Repeat the line for each pattern on your list. When you are matching a previous instrument, attach face and profile photographs.
| Field | Example entry |
|---|---|
| Family | Jacquette (sickle form) |
| Named pattern and full figure | Jacquette 30/33 |
| Working ends | Two ends on one handle, counted as one instrument |
| Working-end material | State it if it matters for your use |
| Terminal shank and handle | The handle you use, or a photo of your current instrument |
| Quantity | 12 complete instruments |
| Packaging and destination | Individual pouches; your country |
Dental Scalers Selection Summary
| Specification | Details |
|---|---|
| How scalers are supplied | Quoted to order from your pattern list; no individual scaler is listed on this page |
| Hand scaler families | Anterior and posterior sickle, Jacquette, hoe, periodontal file and implant-maintenance hand instruments |
| Pattern fields | Scaler family, named pattern and full figure, working-end geometry, terminal shank, handle, and working-end material |
| Pattern references (identification vocabulary) | For example H6/H7, Morse 0/00, U15/30 and 204S for sickle scalers, Jacquette 30/33, hoe 7/8, and Hirschfeld file 3/7 |
| Order details | Complete instruments per exact pattern and figure, working ends, handle, quantity, packaging, and destination |
Other Periodontal Instruments Subcategories
Gracey Curettes
Choose individual Gracey replacements or a seven-piece set. Check figure pairs, subtype and quantities against your list, with pac...
View SubcategoryUniversal Dental Curettes
Universal curettes quoted by pattern family, figure, shank and handle, including Barnhart, Columbia, Langer, McCall and Younger-Go...
View SubcategoryPeriodontal Knives
Periodontal knives quoted to order by pattern, figure, side, blade form and handle, from broad Kirkland-type to narrow Orban-type...
View SubcategoryDental Scalers FAQ
Does this page list scalers I can order directly?
No. No scaler is listed as a product here: hand scalers are quoted to order. Send the pattern name and full figure, the working ends and the handle, and we price that list. Names such as H6/H7, Morse 0/00 or 204S describe a requirement and are not product listings.
Does this hand-scaler category also describe powered scaler tips?
No. Hand scalers are complete manual instruments, while powered scaler tips are components for a specified powered system and need their own matching reference. Keep those requirements separate when you prepare an order; a similar scaler name does not identify a powered connection or system compatibility.
How is a sickle scaler different from a curette?
A conventional sickle scaler has a pointed tip, whereas a conventional curette has a rounded toe and a different working-end design. Use the instrument family specified for the assortment and compare its full pattern. This difference identifies tools for purchasing; it is not a treatment or technique recommendation.
What should I compare between anterior and posterior scaler patterns?
Compare the named pattern, working-end shape, shank angulation and end orientation specified for the required instrument. Anterior and posterior designations help organize the range but do not replace the full reference. Include both ends for a double-ended instrument when checking a replacement or a tray schedule.
Does a combined scaler pattern mean two separate supplied instruments?
No. A combined double-ended designation describes two working ends on one handle. Record the full designation as one complete instrument with its quantity, and verify the actual end configuration on the product reference instead of splitting a combined title into separate order lines.
Can a general scaler description establish suitability for implant maintenance?
No. Use the exact instrument specification and the manufacturer instructions for that application: working-end material and the supported surface or system matter, and a category title or a general metal description does not establish them. Keep any documented application designation attached to the selected reference instead of extending it to every scaler.
What information do I need to request an exact scaler pattern?
The scaler family, the pattern name and full figure, both working ends for a double-ended instrument, the handle, the quantity, and the working-end material where it matters. If you are matching an instrument you already use, add its previous reference and clear face and profile photographs.
Need Dental Scalers in Bulk?
Send your instrument list and quantities for manufacturer-direct pricing, custom branding, or mixed-category quotes.