Dental Scissors

Curved Operating Scissors

Curved operating scissors, 14.5 cm overall, with tungsten carbide (TC) cutting inserts on a polished AISI 420 stainless-steel body. The pictured pair has two rounded tips. Sold as one instrument.

Listed pricing
Single piece $9.00Single piece $5.85Black Friday 202635% OFFYou save: Single piece $3.15Offer ends in13days09hrs19min19sec35% off all dental and surgical instruments, including listed and quoted product prices. No code needed. Shipping and taxes are separate.
In stock. Final price depends on the selected configuration and order requirements.
Product code
DIS-DEN-0343
Material
AISI 420 stainless-steel body with tungsten carbide (TC) cutting inserts
Finish
Polished
Size
14.5 cm overall length
MOQ
confirmed with your quote

Courier delivery. We ship through DHL, FedEx or another available courier, depending on your destination. We confirm the courier, shipping cost and estimated delivery time with your order. Shipping details

About Curved Operating Scissors

These curved operating scissors combine tungsten carbide (TC) cutting inserts with a polished AISI 420 stainless-steel body, at 14.5 cm overall. They are priced and supplied per instrument, so you can replace a single pair in a tray or order the quantity your practice or distribution stock requires.

At a glance

  • Blade profile: curved
  • Overall length: 14.5 cm (approx. 5.7 in)
  • Cutting edges: TC inserts
  • Body: AISI 420 stainless steel, polished
  • Supplied as: one reusable instrument

Matching a replacement pair

Operating scissors are general-purpose cutting scissors for clinical and surgical work. A curved pair is chosen for the way its blades approach the cutting site and keep the tips in view past the hand. Curved and straight operating scissors each come in several lengths and tip combinations, so the curve settles the profile and leaves the tips and length as separate choices. Compare each attribute against the pair you are replacing:

  • Overall length: 14.5 cm on this instrument.
  • Blade approach: curved.
  • Tip form: compare the tips on your current pair with ours before ordering. A photo with your enquiry lets us check them for you.
  • Cutting edge: TC inserts rather than plain stainless-steel blades. This matters if you keep carbide-edged and standard scissors in separate sets.

For a different length or blade profile, see the full dental scissors range.

When matching curved operating scissors, state both tip shapes and the working blade length in your inquiry, separately from the 14.5 cm overall length. A side-on and an end-on photo of your current pair, or a tray reference, helps us check these details before quoting. Include them with your quote request.

Tungsten carbide edges, stainless-steel body

TC refers to the tungsten carbide inserts that form the cutting edges. Tungsten carbide is much harder than stainless steel, which is why it is used for the part of the blade that does the cutting. The instrument has an AISI 420 stainless-steel body with a polished finish. In an inventory or tender, list it as stainless-steel scissors with TC inserts rather than as solid carbide, so the description matches the construction.

Ordering and reprocessing

A useful quote request gives the SKU (DIS-DEN-0343), the number of instruments, your required tip configuration, and any packaging or documentation your purchasing process requires. The scissors are reusable. Clean and sterilize them according to the processing instructions supplied with the instrument, within your facility's validated cycle. When you are ready, request a quote for the quantity you need.

Using the two photo views to match curved operating scissors

The product photo shows the same scissors twice, once whole and once enlarged at the blades. Each view answers a different matching question.

Reading the photo

Complete curved operating scissors with gold-coloured finger rings at left, and an enlarged view of the same pair's curved blades with rounded ends at right

Curved operating scissors: complete view and blade close-up

  1. Left: complete scissors

    The whole instrument. The 14.5 cm length is measured across all of it, from finger rings to blade tips.

  2. Centre screw

    The pivot, where the curved blades leave the shanks.

  3. Right: enlarged blades

    A close-up of the same pair's blades, not a second pair.

  4. Blade ends

    Both ends appear rounded in this photo. Tip configuration is not a listed specification, so state the tips you need when you enquire.

  5. Finger rings

    Gold-coloured.

Which view answers which question

Example: your tray pair measures 14.5 cm, but its tips come to points. The length matches; the tips may not. Photograph your blade ends at a similar angle to the close-up and include the photo with your enquiry so the tips can be checked before quoting.

Matching a replacement pair
QuestionUseCompare
Same size?Complete viewYour pair's overall length against 14.5 cm, not blade length alone
Same curve?Complete view and pivotWhich way and how far the blades curve from the pivot
Same tips?Enlarged blade viewThe shape of both blade ends
Have experience with Curved Operating Scissors?Share verified buyer or evaluator feedback. It takes about a minute.

Curved Operating Scissors Questions

What are curved operating scissors used for?

Operating scissors are general-purpose cutting scissors for clinical and surgical work. The curved profile changes how the blades approach the cutting site and keeps the tips in view past the hand. This pair is curved, 14.5 cm overall, with tungsten carbide cutting inserts.

What should I compare between curved and straight operating scissors?

Treat blade profile, tip configuration and overall length as three separate choices. Curved and straight operating scissors are each made with different tip combinations, so the curve tells you the profile, not the tips. Then check the length and whether you need TC or plain stainless-steel edges.

Are these sharp/sharp, sharp/blunt or blunt/blunt?

The pictured 14.5 cm pair shows two rounded tips. If the blade length or exact tip form is critical to a replacement, include that detail with SKU DIS-DEN-0343 on your quote.

Are the scissors made of solid tungsten carbide?

No. The tungsten carbide (TC) inserts form the cutting edges. The body of the instrument is AISI 420 stainless steel with a polished finish.

What is the overall length of these scissors?

14.5 cm overall, which is approximately 5.7 inches.

How many instruments come in one unit?

One. Each unit is a single pair of curved operating scissors, so you can order the exact quantity you need.

WhatsApp

Black Friday

35%off

Save on everything from extraction forceps to orthodontic pliers and implant kits.

Offer ends in13days09hrs19min19sec

Browse the sale
A dental mirror, curved hand instruments and forceps arranged on a metal tray