About Implant Soft Brushing Instrument Kit
This implant brushing instrument kit contains five distinct brush patterns in one cassette: large, medium, straight-angulated, left-angulated and right-angulated. The set is listed separately from general implant and microsurgery kits because its brush working ends, shaft angles and replacement requirements need their own specification.
Five Documented Brush Positions
The current set schedule includes a large brush with a nominal 28 mm reference, a medium brush with a nominal 16 mm reference, and straight-, left- and right-angulated patterns carrying nominal 6 mm references. Those numbers must be linked to an agreed measurement basis on the drawing or approved sample; they should not be interpreted as a brush diameter, working length or overall length without that confirmation.
The five-position cassette identifies each pattern separately. Left and right instruments can be marked clearly so setup, receiving inspection and replacement orders use the correct orientation.
Working-End and Shaft Details to Confirm
For every brush, specify the working-end construction, relevant width or diameter, working length, wire or filament arrangement where applicable, shaft angle, handle pattern and overall length. The straight and angled instruments should be compared by their documented geometry rather than by the shared nominal reference alone.
We do not add surface-safety, decontamination or clinical-outcome statements unless they are supported by the approved technical and regulatory documentation for the ordered product.
Ordering a Complete Set or One Replacement
The standard offer is the five-instrument set with its cassette. Individual replacement patterns can also be assessed by the parent set SKU, orientation, nominal reference, complete dimensions and cassette position. For an existing instrument, photographs of the working end, shaft profile and markings help prevent a left, right or straight pattern from being confused.
Material, Finish and Inspection
Working-end material or construction, handle material and finish are confirmed against the approved order specification. Inspection can cover the stated working-end measurements, shaft angle, overall length, pattern marking and set count. We manufacture under ISO 9001:2015 quality management certification.
Packaging and Private-Label Orders
The cassette design, product labels, inner protection, export packaging and private-label artwork are agreed before manufacture. MOQ depends on the approved configuration, branding and packaging requirements.
What to Include in Your Enquiry
Send the five-pattern set reference or required replacement pattern, drawing or measurement basis for the nominal references, working-end construction, dimensions, shaft angle, handle, quantity, packaging, branding and destination country. We will confirm the documented specification before quoting.