About Twist Implant Drill Kit
The Twist Implant Drill Kit pairs five sized external-irrigation twist drills, at 2.8, 3.2, 3.65, 4.2 and 5.2 mm, with the marking, pilot, alignment and driving instruments that work alongside them. One of each instrument is supplied in polished AISI 420 stainless steel that is reusable and autoclavable, so the drilling, alignment and driving tools arrive together in one order.
Kit contents by task
Drilling:
- Marking drill
- Pilot drill, external irrigation
- Twist drills, external irrigation: 2.8, 3.2, 3.65, 4.2 and 5.2 mm
Alignment and reach:
- Parallel pins, one long and one short
- Drill extender
Driving:
- Ratchet wrench, 6.35 mm hex
- Short latch screw driver, 1.25 mm
- Short latch implant driver, 2.42 mm
- Short ratchet-key screw driver, 1.25 mm
- Short ratchet-key implant driver, 2.42 mm
- Hand-wrench adapter
Marking, pilot and sized drills
The marking drill and the pilot drill are listed separately from the five sized twist drills. Each has its own role within the drilling group; your implant system's protocol determines the sequence. The five twist drills are the sized tools, and each is identified by its cutting diameter, which gives you five diameters from 2.8 to 5.2 mm in one kit. The parallel pins are alignment checks, not additional cutting drills. The extender gives a drill extra reach where access calls for it.
External irrigation and your setup
The pilot drill and all five twist drills are external-irrigation designs. Coolant reaches the site from outside the drill, typically from the handpiece or a separate irrigation line, rather than through a channel running inside the drill. Choose this kit when your surgical motor and handpiece deliver coolant that way. A protocol built around internally irrigated drills calls for a different drill type.
Reading the size labels
Several millimetre figures appear in the kit, and each refers to something different:
- 2.8 to 5.2 mm is the cutting diameter of each twist drill.
- 1.25 mm is the size label of the two screw drivers, one latch and one ratchet-key.
- 2.42 mm is the size label of the two implant drivers, one latch and one ratchet-key. It is a driver size, not a drill or implant-body diameter.
- 6.35 mm is the hex drive of the ratchet wrench.
Two driver styles at each size
Each driver size comes in a latch version and a ratchet-key version. The ratchet wrench and a hand-wrench adapter are supplied alongside them. This gives you two connection styles at both the 1.25 mm and the 2.42 mm size. Fit to your components depends on the driver tip, how it engages, and the drive interface, so match these to the implant system and handpiece you use.
When you request pricing, tell us how many kits you need, the drill length and shank your implant system requires, the handpiece connection you use, and any packing or documentation you need with the shipment. See the wider dental implant instruments range, or request a quote for this kit.





