Dental Scissors

La-Grange Double Curved Scissors Precision Dental Tissue & Gum Trimming Surgical

One 14 cm La-Grange double-curved tissue and gum scissors with tungsten carbide (TC) cutting components and an AISI 420 stainless-steel body. Reusable and autoclavable.

Listed pricing
$15.95$10.37Black Friday 202635% OFFYou save: $5.58Offer ends in12days08hrs46min43sec35% off all dental and surgical instruments, including listed and quoted product prices. No code needed. Shipping and taxes are separate.
In stock. Final price depends on the selected configuration and order requirements.
Product code
DIS-DEN-0339
Material
Stainless steel (AISI 420) body with tungsten carbide (TC) cutting components
Size
14 cm (approx. 5.5 in) overall length
MOQ
confirmed with your quote

Courier delivery. We ship through DHL, FedEx or another available courier, depending on your destination. We confirm the courier, shipping cost and estimated delivery time with your order. Shipping details

About La-Grange Double Curved Scissors Precision Dental Tissue & Gum Trimming Surgical

Our La-Grange scissors combine a double-curved profile with tungsten carbide (TC) cutting components, at an overall length of 14 cm (about 5.5 inches). Each is one reusable tissue and gum scissors with an AISI 420 stainless-steel body, for practices and distributors who stock the La-Grange pattern in a TC version.

Profile and length: two separate checks

La-Grange, also written La Grange or LaGrange, names the pattern, and the double curve is part of that pattern's identity. The curve shapes how the blades approach the tissue and how the tips sit in view, which is why clinicians who use a double-curved pattern tend to specify it by profile. The length sets the reach and how the instrument sits in the hand. Overall length is a separate choice, because the pattern is listed at more than one length across the market; ours is 14 cm. When you match existing stock, compare a side view of your current scissors' working end with ours and check the length too, since two instruments can share a profile and still differ in reach.

If you also stock our Neumann scissors, keep the two apart on your order. Both are double curved, but the Neumann is a 120 mm stainless-steel instrument, while this La-Grange is 14 cm with TC cutting components.

How the TC construction is divided

The tungsten carbide is in the cutting components. The instrument has an AISI 420 stainless-steel body. This places a very hard cutting material exactly where the blades close, and the familiar stainless steel everywhere else.

For distributors who list TC and all-steel scissors separately, this instrument belongs with the TC line. For a practice, the TC designation is the detail to quote if your clinicians specifically ask for carbide-edged La-Grange scissors.

Ordering and reprocessing

Pricing is per single instrument. Include your quantity, plus any packaging or documentation preferences, when you request a quote. If you are replacing scissors already in use, add a close-up of the working end and note any edge or tip requirement, so we can check it before quoting.

The scissors are reusable and autoclavable. Use the validated instructions supplied with them for cleaning and sterilization cycles.

Compare other patterns and lengths in our dental scissors range.

Match your double-curved scissors

Use the photo key, the La-Grange and Neumann comparison and the order record below to match this 14 cm TC La-Grange to the scissors already on your tray.

What the photo shows

The image shows one La-Grange scissors three ways: the complete instrument and two enlarged details of the same piece. One instrument is also the unit you order.

La-Grange double-curved scissors shown whole, with enlarged open-blade and side-profile details

One 14 cm La-Grange double-curved scissors with tungsten carbide cutting components, shown whole and in two enlarged details.

  1. Complete instrument

    Runs diagonally across the centre, with the gold-coloured finger rings at upper right and the curved working blades at lower left.

  2. Shanks and pivot

    The long shanks lead from the rings to the pivot. Beyond the pivot, the TC cutting components meet where the blades close.

  3. Open-blade detail

    The upper-left enlargement shows the blades opened, so you can see how the working ends meet.

  4. Side-profile detail

    The bottom enlargement shows the double curve from the side. Hold a side photo of your current scissors against this view.

La-Grange or Neumann: both double curved

On both of our double-curved scissors, the curve shapes how the blades approach the tissue and how the tips sit in view. They are still separate patterns, with different lengths and construction, so choose by pattern and length together.

Our two double-curved scissors compared
DetailLa-Grange (this page)Neumann
PatternLa-GrangeNeumann
ProfileDouble curvedDouble curved
Overall length14 cm (approx. 5.5 in)120 mm (approx. 4.7 in)
ConstructionTungsten carbide (TC) cutting components on an AISI 420 stainless-steel bodyAISI 420 stainless steel
Unit1 instrument1 instrument
Choose it whenYour team asks for carbide-edged La-Grange scissorsYour team uses the stainless-steel Neumann

Replacement order record

Start with the broad match and finish with the fine one. Pattern and length decide which scissors you are ordering, and the close-up then confirms the working end.

  1. Pattern and profile

    Confirm the scissors are La-Grange, double curved. Compare a side view of your current scissors with the side-profile detail above.

  2. Overall length

    Measure your current scissors from end to end. This model is 14 cm overall.

  3. Construction

    Note whether you need TC cutting components. This model has them on an AISI 420 stainless-steel body.

  4. Working-end close-up

    Photograph the blades and tips of your current scissors and state any edge or tip requirement. We check it against this model before quoting.

  5. Order line

    Example: La-Grange double-curved scissors, 14 cm overall, TC cutting components, DIS-DEN-0339, quantity 3, side-profile and close-up photos attached.

Have experience with La-Grange Double Curved Scissors Precision Dental Tissue & Gum Trimming Surgical?Share verified buyer or evaluator feedback. It takes about a minute.

La-Grange Double Curved Scissors Precision Dental Tissue & Gum Trimming Surgical Questions

Which La-Grange configuration is supplied?

One 14 cm double-curved La-Grange scissors with tungsten carbide cutting components and an AISI 420 stainless-steel body.

Why does the double-curved profile matter when selecting these scissors?

The double curve shapes how the blades approach the tissue and how the tips sit in view past the hand. Clinicians who use the La-Grange pattern specify it by that profile, so match a side view of your current scissors' working end against this one when restocking.

Are these the same as your 120 mm Neumann scissors?

No. Our Neumann is a separate pattern at 120 mm overall in AISI 420 stainless steel. This La-Grange is 14 cm overall with tungsten carbide cutting components on a stainless-steel body. Both are double curved, so check pattern, length and construction when ordering.

Is the whole instrument made of tungsten carbide?

No. Tungsten carbide is used for the cutting components. The rest of the instrument, including the handles, is AISI 420 stainless steel.

Is 14 cm the blade length or the overall length?

14 cm is the overall length, about 5.5 inches. The La-Grange pattern is sold in more than one length, so check this against your current instrument.

Are the blades serrated?

Edge and tip details are not listed for this model, so confirm them before ordering. If you need a particular edge, such as serrated, state it in your quote request and add a close-up of the working end you use now so we can check it before quoting.

WhatsApp

Black Friday

35%off

Save on everything from extraction forceps to orthodontic pliers and implant kits.

Offer ends in12days08hrs46min43sec

Browse the sale
A dental mirror, curved hand instruments and forceps arranged on a metal tray