Dental Scissors

Neumann Scissors 120mm Double Curved

Neumann scissors in the 120 mm double-curved configuration, made from reusable AISI 420 stainless steel and supplied as one instrument.

Listed pricing
$15.95$10.37Black Friday 202635% OFFYou save: $5.58Offer ends in12days08hrs46min48sec35% off all dental and surgical instruments, including listed and quoted product prices. No code needed. Shipping and taxes are separate.
In stock. Final price depends on the selected configuration and order requirements.
Product code
DIS-DEN-0340
Material
Stainless steel (AISI 420)
Size
120 mm (approx. 4.7 in) overall length
MOQ
confirmed with your quote

Courier delivery. We ship through DHL, FedEx or another available courier, depending on your destination. We confirm the courier, shipping cost and estimated delivery time with your order. Shipping details

About Neumann Scissors 120mm Double Curved

Our Neumann scissors come in the 120 mm double-curved configuration, made from AISI 420 stainless steel and supplied as one reusable instrument. At about 4.7 inches overall, they suit practices restocking this exact pattern and distributors adding a specific Neumann size to their range.

Why the double curve matters

Double curved describes the instrument's profile: two curves rather than a straight line or a single sweep. Compared with straight or single-curved scissors, the profile changes how the working end approaches the site and how clearly the tips stay in view past the hand. If your clinicians have settled on a double-curved Neumann, the profile is as much a part of the specification as the pattern name and length.

Neumann or La-Grange?

We also supply a double-curved La-Grange, and the two are different instruments:

  • Neumann (this instrument): 120 mm overall, AISI 420 stainless steel.
  • La-Grange double-curved scissors: 14 cm overall, tungsten carbide (TC) cutting components on an AISI 420 stainless-steel body.

Order by pattern and length together. Choose this Neumann when your team uses the stainless-steel Neumann, and the La-Grange when the requirement is for carbide-edged double-curved scissors.

Matching the Neumann you already use

Put three details side by side before ordering replacements:

  • Pattern: Neumann, as marked on your existing instrument or shown in your previous orders.
  • Length: 120 mm overall.
  • Profile and working end: a side-on photo of your current scissors showing the curve and the tips.

The same pattern name can vary between makers, so match all three details together rather than relying on the name alone.

Construction, care and ordering

The stainless-steel construction is reusable and autoclavable. Reprocess it under the validated instructions supplied with the instrument.

Each unit is a single scissors, so state the number of pieces you need when you request a quote, along with any packing requirements and your comparison photo. Our dental scissors range covers the other cutting patterns you may be sourcing at the same time.

Reordering the Neumann 120 mm Double-Curved Scissors: Photo Check and Restock Card

Use this guide to confirm the double-curved profile from two angles, keep the exact replacement details together for repeat enquiries, and choose between this all-steel Neumann and our carbide-edged La-Grange.

Check the profile from the front and the side

Our product photo shows one design from two angles. The large front view shows the finger rings, joint and closed blades. The smaller side view on the left follows the instrument from the rings to the tips, where the double curve becomes clear. Curved and straight patterns can look alike from the front, so the side view confirms the match.

Photograph your current Neumann from the same two angles and compare the photos with ours. Look at the outline and at where the tips sit beyond the shank. If both look alike, you have a good basis for a like-for-like reorder. The double-curved profile affects how the working end approaches the site and helps keep the tips in view past the hand. Match the profile as carefully as the name and length.

Neumann 120 mm double-curved scissors in two views: a large front view with finger rings at the bottom and blades above, and a smaller side view on the left showing the curved profile.

Two views of the same Neumann 120 mm double-curved design. This is one instrument, not a two-piece pack.

  1. Front view

    Large upright image with the finger rings at the bottom and the joint and closed blades above.

  2. Side view

    Smaller image on the left, showing the profile from the rings through the shank to the tips.

Your restock card

Keep one record for this instrument and send it with each repeat enquiry. The first part comes from our catalogue. You fill in the second part.

  • Product code: DIS-DEN-0340
  • Pattern and profile: Neumann, double curved
  • Size: 120 mm (approx. 4.7 in) overall length
  • Construction: AISI 420 stainless steel, without TC cutting components
  • Unit: one complete instrument
  1. Quantity

    State how many pieces you need. Each unit is a single pair of scissors.

  2. Previous reference

    Add the order number or reference from your last purchase, if you have it.

  3. Photos

    Attach a front photo and a full side-profile photo of the scissors you are replacing, taken from the same angles as our product image.

Neumann or La-Grange?

We supply both patterns with a double curve, but they are separate instruments. Order by pattern and length together.

Catalogue facts for choosing between our two double-curved scissors
DetailNeumann (this instrument)La-Grange
Overall length120 mm (approx. 4.7 in)14 cm
Cutting componentsAISI 420 stainless steel, no TCTungsten carbide (TC)
BodyAISI 420 stainless steelAISI 420 stainless steel
ProfileDouble curvedDouble curved
Choose it whenYour team uses the all-steel NeumannYou need double-curved scissors with carbide edges
Have experience with Neumann Scissors 120mm Double Curved?Share verified buyer or evaluator feedback. It takes about a minute.

Neumann Scissors 120mm Double Curved Questions

What does double curved mean when comparing these scissors?

It describes the profile: the instrument carries two curves rather than a straight line or a single curve. The profile affects how the working end approaches the site and how much of the tips stays in view. When matching a replacement, send a full side-profile photo of your current scissors with your quote request.

Are your Neumann and La-Grange scissors the same?

No. They are separate double-curved patterns. This Neumann is 120 mm overall in AISI 420 stainless steel. Our La-Grange is 14 cm overall with tungsten carbide cutting components on a stainless-steel body. Order by pattern and length.

Is 120 mm the overall length?

Yes. These Neumann scissors are 120 mm overall, about 4.7 inches, with a double-curved profile.

Is this Neumann model TC or stainless steel?

This Neumann is the AISI 420 stainless-steel model. TC cutting components are not part of this offer. Some makers produce TC versions of the pattern; if you need carbide edges on a double-curved scissors, our 14 cm La-Grange has them.

How many scissors come in one unit?

One. Each unit is a single Neumann scissors, so quote your quantity in pieces.

Are these Neumann scissors reusable?

Yes. They are made of AISI 420 stainless steel and are autoclavable. Reprocess them under the validated instructions supplied with the instrument.

WhatsApp

Black Friday

35%off

Save on everything from extraction forceps to orthodontic pliers and implant kits.

Offer ends in12days08hrs46min48sec

Browse the sale
A dental mirror, curved hand instruments and forceps arranged on a metal tray