Surgical Instruments

Castroviejo Needle Holders

Castroviejo needle holder, 14 cm, with fine straight tungsten carbide jaws, spring handles and a locking catch for fine suturing. Order a single holder or a set; we confirm the set contents in your quotation.

Product code
DIS-SUR-NH-CASTRO
Size
14 cm overall length
MOQ
confirmed with your quote

Courier delivery. We ship through DHL, FedEx or another available courier, depending on your destination. We confirm the courier, shipping cost and estimated delivery time with your order. Shipping details

About Castroviejo Needle Holders

The Castroviejo is a spring-handled needle holder with fine, narrow jaws, used where small needles and fine sutures need precise control, such as periodontal, implant and other dental microsurgery. You hold it like a pen and close it with light finger pressure; a catch on the handles keeps the jaws locked on the needle. Our listed version is 14 cm long with straight tungsten carbide (TC) jaws.

Why the jaw matters

The narrow tip lets you grip small needles close to the suture without crushing them. Tungsten carbide jaw faces are harder than plain stainless steel faces, which is why many clinicians choose them for instruments that grip needles all day. Check that the jaw width suits the needle sizes in your suture range.

Castroviejo or another needle holder?

For fine work, the Castroviejo gives more control than a ring-handled holder. For general closures with larger needles, a Mayo-Hegar needle holder or a palm-held Mathieu needle holder may suit better. The Castroviejo is also part of our four-piece dental microsurgery set.

Ordering

  • Order a single holder or a set. Tell us how many you need and we confirm what the set contains in your quotation.
  • If you need a curved jaw or a different length, say so and we confirm whether it can be supplied.
  • Evaluation samples of 1–3 pieces per pattern are available before a larger order.

Cleaning and sterilization

Follow the processing instructions supplied with the instrument and your facility's validated protocol. Clean the fine jaws carefully and process the holder with the catch disengaged.

Choose your needle-holder grip and request the right Castroviejo

Compare the Castroviejo grip with our other needle holders, then send a request that identifies this exact version.

Spring and catch, or another grip

The version on this page is 14 cm long with straight, fine tungsten carbide (TC) jaws. The Castroviejo is also included in our four-piece dental microsurgery set.

Needle holders compared by grip
HolderGrip and closingSuits
Castroviejo (this page)Pen-held spring handles; catch keeps the jaws closedSmall needles and fine sutures that need precise control
Mayo-HegarRing handles with a ratchetGeneral closures with larger needles
MathieuPalm-heldGeneral closures with larger needles

Check the holder and send a matching request

  1. Name the version

    DIS-SUR-NH-CASTRO, 14 cm, straight TC jaws.

  2. State the quantity

    Give the number of single holders, or ask for a set and list the contents you want.

  3. Note any change

    If you need a curved jaw or a different length, say so and we confirm whether it can be supplied.

  4. Matching a current holder

    Give its overall length and jaw profile, and say whether it has a catch. Samples of 1 to 3 pieces are available.

Straight Castroviejo needle holder with serrated grip, gold-coloured spring arms and catch, plus an enlarged inset of its fine jaws

One complete holder, with an enlarged view of the same jaws at upper right.

  1. Straight fine jaws

    Working end of the main holder, upper left

  2. Jaw inset

    Magnified jaw face of the same holder, not a second holder

  3. Serrated grip

    Textured sections along both arms

  4. Spring arms and catch

    Gold-coloured arms meeting at the catch near the base

Have experience with Castroviejo Needle Holders?Share verified buyer or evaluator feedback. It takes about a minute.

Castroviejo Needle Holders Questions

Which Castroviejo needle-holder configuration is offered here?

This is the 14 cm Castroviejo with straight, fine jaws, tungsten carbide (TC) working surfaces and spring handles with a catch. Castroviejo names a wider family that also has other jaw shapes and sizes, so the straight jaw profile and the 14 cm overall length are what identify this version.

How does a Castroviejo holder differ from a Mayo-Hegar holder?

A Castroviejo has spring handles and fine jaws, and this version adds a catch. A Mayo-Hegar holder has ring handles and a ratchet. The difference is the handle and jaw architecture, and sharing the job of holding a needle does not make the two interchangeable for every needle or every user's handling preference.

What does the catch on this spring-handle holder do?

The catch holds the closed handles in place, which is what separates this holder from a spring-handle holder that does not lock. It describes how the holder closes. It is not a rated jaw force and it says nothing about which needle sizes the jaws suit.

Does TC describe the whole Castroviejo holder?

No. On this holder TC means tungsten carbide, and it refers to the working surfaces of the jaws, not to the handles or body. TC also does not tell you the jaw shape, so when you compare holders check the jaw profile, straight or curved, separately from the jaw material.

Is 14 cm enough information to match a Castroviejo holder to a needle?

No. 14 cm is the overall length of the holder. Matching a needle also depends on the jaw contact profile, the jaw dimensions and the needle manufacturer's instrument requirements. This holder has straight, fine tungsten carbide (TC) jaws, but its length is not a suture-size or needle-size rating.

WhatsApp