Surgical Instruments

Mathieu Needle Holders

Mathieu needle holders with palm-squeeze spring handles, a ratchet catch and straight jaws, offered in 16–20 cm lengths. Tell us the length and quantity and we confirm the jaw details in your quotation.

Product code
DIS-SUR-NH-MATHIEU
Size
16–20 cm; confirm your length in the quotation
MOQ
confirmed with your quote

Courier delivery. We ship through DHL, FedEx or another available courier, depending on your destination. We confirm the courier, shipping cost and estimated delivery time with your order. Shipping details

About Mathieu Needle Holders

A Mathieu needle holder is held in the palm rather than through finger rings. Squeezing the spring handles closes the jaws and engages a ratchet catch between the handles, so the needle stays gripped while you place the suture. We supply this pattern with straight jaws in lengths from 16 to 20 cm.

Mathieu or a ring-handled holder?

The palm grip suits clinicians who prefer to hold and release the instrument without moving their fingers in and out of rings. If your team is used to finger rings, compare our Mayo-Hegar needle holders. For fine microsurgical needles, a spring-handled Castroviejo needle holder is the usual choice.

Choosing the length

Pick the length that matches the rest of your suturing set and the reach you need at the surgical site. Longer holders give more reach; shorter ones keep the hand closer to the work. If you are replacing an existing instrument, measure it tip to handle end and quote that length.

What to send with your order

  • The length you need, between 16 and 20 cm.
  • The quantity.
  • Any jaw requirement, such as serrated faces or carbide inserts. We confirm the jaw specification of the quoted model before you order.
  • Whether you want an evaluation sample first. We supply 1–3 pieces per pattern.

Cleaning and sterilization

Process the holder according to the instructions supplied with it and your facility's validated protocol. Instruments with a ratchet are normally cleaned and sterilized with the ratchet disengaged so that steam and cleaning solution reach the joint.

We also supply iris scissors and other dental surgical instruments for the same suturing set.

Choose the grip, then specify length and jaws

Identify the Mathieu by its palm grip in the photo and compare it with our ring-handled and pen-held holders. Then send the length and jaw details in one request.

Parts of the holder in the photo

The photo shows one complete Mathieu needle holder, angled from its jaws at upper left to its palm grip at lower right.

Mathieu needle holder with straight jaws, palm-squeeze spring handles and a ratchet catch

One Mathieu needle holder with straight jaws, palm-squeeze spring handles and a ratchet catch.

  1. Straight jaws

    At upper left, these grip the needle. Jaw faces and any inserts are confirmed in your quotation.

  2. Pivot

    The joint where the jaws meet the handles.

  3. Palm-squeeze spring handles

    These are held in the palm rather than through finger rings. The spring returns the handles when you relax your grip.

  4. Ratchet catch

    Lower right, between the handle ends. Squeezing engages it, so the needle stays gripped while you place the suture. Its gold colour is a finish detail, not a material specification.

Mathieu, Mayo-Hegar or Castroviejo

The grip is the first difference between these three needle-holder patterns. Settle on the grip, then compare the jaws and the length.

Grip-first comparison of our needle-holder patterns
PatternGripClosureJaws and length on our listingOften chosen when
Mathieu (this page)Palm-squeeze spring handlesRatchet catch between the handlesStraight jaws; 16–20 cm rangeYou want to hold and release the holder without moving your fingers in and out of rings
Mayo-HegarFinger ringsRatchetJaw profile and contact surface specified by referenceYour team is used to ring handles
CastroviejoHeld like a pen, with spring handlesCatch on the handlesFine, narrow straight TC jaws; listed at 14 cmSmall needles and fine sutures need precise control

Length and jaw request

16–20 cm is the range we offer. State the length you want as a request, and we confirm it in the quotation together with the jaw specification.

  • Item: Mathieu needle holder, DIS-SUR-NH-MATHIEU
  • Requested overall length (example): 18 cm, measured from the tip to the handle end
  • Jaws (example): straight, with serrated faces requested
  • Matching reference: the reference of your existing holder or needle, if the match depends on the jaws
  • Quantity (example): 4 holders, with optional evaluation samples of 1–3 pieces first
Have experience with Mathieu Needle Holders?Share verified buyer or evaluator feedback. It takes about a minute.

Mathieu Needle Holders Questions

What overall length range is offered for Mathieu needle holders?

The range is 16–20 cm overall length. For a purchasing list, state the required length and the number of holders, and for a matched order identify the length and the jaw configuration together.

How does the Mathieu spring-and-ratchet handle work as a design?

The holder has palm-squeeze handles with spring action and a ratchet closure. The spring provides the handle return action and the ratchet provides the closure mechanism. Both are recognizable features of the handle pattern and can be compared independently of the jaws and the overall length.

How does a Mathieu holder differ from a Mayo-Hegar holder?

The main grip difference is palm-squeeze handles on the Mathieu versus finger rings on the Mayo-Hegar pattern. Both are needle-holder families, but the handle form changes the instrument specification, so identify the grip you need first, then compare jaw geometry and overall length for the model you intend to match.

Are overall length and jaw clamping length the same measurement?

No. Overall length measures the complete holder, while clamping length describes the jaw-contact region, and tip width and jaw-face form are further independent details. A matching overall length therefore still needs a separate jaw comparison when you replace a specific holder or meet an instrument specification.

Which details matter when matching a Mathieu holder to an existing needle-holder reference?

Compare the palm-grip format, the required overall length, the straight jaw profile and the jaw-contact specification, and include the existing needle or holder reference when the match depends on the jaws. Those details describe the fit more precisely than the pattern name or the handle's appearance alone.

WhatsApp