Periodontal Instruments
Periodontal instruments include scalers, Gracey and universal curettes, knives, files, and chisels. Use working-end geometry, terminal shank, pattern number, handle, and set composition to identify the right products for your order. Clinics, schools, and distributors can compare individual patterns, defined sets, replacements, packaging, and manufacturer-direct quotation requirements.
Browse Periodontal Instruments by Type
Start with the instrument family that matches the pattern, procedure, or ordering requirement you need.
Gracey Curettes
Gracey curettes are area-specific periodontal instruments with offset blades angled at 60–70° to the terminal shank. The numbering...
Compare Product FamilyUniversal Dental Curettes
Universal curettes have a rounded toe and two cutting edges that can adapt to multiple tooth surfaces. Compare Barnhart, Columbia,...
Compare Product FamilyDental Scalers
Dental hand scalers remove accessible calculus with pattern-specific working ends. Compare anterior and posterior sickle scalers,...
Compare Product FamilyPeriodontal Knives
Periodontal knives include broad gingivectomy, narrow interdental, curved, and intrasulcular patterns. Compare Kirkland, Orban, Go...
Compare Product FamilyPeriodontal Instruments Products
Compare current instruments in this category, including available variations, specifications, and quote options.
Molt Periodontal Instrument Fig. M9
Molt-pattern surgical curette and periosteal instrument (Fig. M9).
Ochsenbein Periodontal Chisel
We manufacture the Ochsenbein periodontal chisel for osseous recontouring and flap-related bone reshaping during periodontal surgery, in Fig. 1 and Fig. 2 patterns. Tell us the figure and quantity you need when requesting a quote.
Orban Periodontal Instrument
We manufacture the Orban interdental knife with a narrow, spear-shaped double-ended blade for interproximal gingival incisions, typically paired with a Kirkland knife for facial and lingual areas. Tell us the figure and quantity you need when requesting a quote.
Posterior Sickle Scalers
We manufacture posterior sickle scalers including 204S, 204SD, 204 IUFW, 135, and Jacquette-style configurations, shanked for posterior access with a pointed toe and triangular cross-section. Tell us the exact pattern suffix and quantity you need when requesting a quote.
Prichard PR3 Periosteal Elevator
A reusable Prichard PR3 periosteal elevator for buyer-specified periodontal and oral-surgery trays. Confirm the blade width and curvature, shank, handle, finish, marking and approved reference.
Sanders Periodontal Knives – 1/2 and 4/5
Double-ended Sanders periodontal knives in Figures 1/2 and 4/5 for buyer-specified gingivectomy instrument ranges. Confirm the blade form, bevel, handle, finish, marking and exact SKU before quotation or repeat supply.
Seldin 23 Periosteal Elevator and Retractor
A reusable Seldin 23 broad periosteal elevator and flap retractor for oral and periodontal surgery trays. Confirm the blade profile, width, shank, handle, finish, marking and approved reference.
Sugarman Periodontal Bone Files
We manufacture Sugarman periodontal bone files for interproximal and furcation calculus using paired cutting surfaces, in Fig. 1S/2S and Fig. 3S/4S patterns with different terminal-shank angles. Tell us the pattern and quantity you need when requesting a quote.
Taylor Periodontal Instrument
We manufacture the Taylor hand instrument for scaling and root-surface debridement in the Fig. 2/3 pattern, suited to both active treatment and periodontal maintenance visits. We recommend comparing it by sample against whatever curette your practice already uses before standardizing.
Todd-Gilmore Periodontal Chisels – Figures 1, 1/2 and 2
Reusable Todd-Gilmore periodontal chisels in Figures 1, 1/2 and 2. Buyers can approve the blade geometry, bevel, working angle, handle, finish and exact SKU for individual supply or surgical set assembly.
Wakefield Bone Chisels – 1W and 2W
Wakefield 1W and 2W reusable bone chisels for buyer-specified oral and periodontal surgical ranges. Confirm the bi-bevel blade geometry, dimensions, handle, finish, marking and exact SKU before supply.
Williger Periosteal Elevators
We manufacture Williger periosteal elevators in 13, 16 and 17 cm lengths, including two separate 16 cm product references, for flap reflection and retraction during oral surgery. Tell us the length, pattern, and quantity you need when requesting a quote.
Younger-Good Universal Curette 7/8
A double-ended Younger-Good 7/8 universal curette for buyer-specified periodontal and hygiene instrument ranges. Confirm the blade, toe, shank, handle, finish, marking and exact SKU before ordering.
Zerling-Chiles Periodontal Instrument 413/414
A Zerling-Chiles periodontal hand instrument identified by the 413/414 figure reference. Buyers should approve the exact working-end drawing or sample before supply because the name does not define a narrower instrument function.
Periodontal Instruments Buying Specifications
| Specification | Details |
|---|---|
| Main families | Scalers, Gracey curettes, universal curettes, periodontal knives, files, and chisels |
| Working-end fields | Blade or tip form, toe, cutting edges, offset, terminal shank, rigidity, and pattern number |
| Handle fields | Diameter, texture, material, finish, weight preference, and marking |
| Order format | Individual patterns, selected assortments, periodontal kits, or private-label ranges |
| Ongoing care | Inspection, sharpening where applicable, cleaning, packaging, sterilization, and replacement |
How to Choose Periodontal Instruments
Identify the Family Before the Pattern Number
Periodontal instruments share a tray, but their working ends are designed differently. Sickle scalers have pointed toes and triangular cross-sections. Curettes have rounded toes and a semicircular cross-section. Gracey curettes are area-specific; universal curettes have two cutting edges used across multiple surfaces. Periodontal knives, files, and chisels are separate cutting or contouring families and should not be grouped under “scaler” simply because they appear in the same specialty.
Once the family is clear, compare the named pattern, number, blade, terminal shank, side, and handle. This order matters. A number without a family can be ambiguous, while a broad family name without the pattern does not define the working end a buyer expects.
- Dental scalers — Sickle, Jacquette, hoe, periodontal-file, and implant-maintenance patterns require different comparison fields.
- Gracey curettes — Area-specific numbering and blade offset are the core selection logic.
- Universal curettes — Compare Barnhart, Columbia, Langer, McCall, Younger-Good, and other stocked patterns.
- Knives, files, and chisels — Use the exact pattern, blade or cutting surface, side, angle, and handle.
Gracey and Universal Curettes Solve Different Selection Tasks
A Gracey curette is chosen through its area-specific pattern number and working-end relationship to the terminal shank. The collection includes individual patterns and a seven-piece set, allowing buyers to replace one instrument or specify a defined assortment. The numbering map must be checked against the exact stocked variation rather than copied from a general chart.
A universal curette uses a rounded toe and two cutting edges. Pattern families such as Barnhart, Columbia, Langer, McCall, and Younger-Good differ in blade and shank geometry. A buyer comparing those products should see the pattern, figure, dimensions where available, handle, packaging, and quantity in one table.
Choose Scalers by Working-End Form and Access
The scaler collection covers anterior and posterior sickle patterns, Jacquette designs, hoe scalers, periodontal files, and implant-maintenance hand instruments. A useful buying comparison records cross-section, point or edge form, terminal shank, working-end dimensions, handle, and working-end material. It should not place unrelated patterns under one familiar figure.
Anterior and posterior labels describe access and shank relationships, while pattern names identify a more specific design. Implant-maintenance instruments require their working-end material to be verified; they must not inherit a material claim from conventional steel scalers.
Plan Handles, Sets, and Replacement Ordering
Handle diameter, texture, and weight affect buyer preference and range consistency. Record the handle as part of the product specification, especially for dental schools and distributors that need repeatable sets. If more than one handle is available, show it as a clear variation rather than burying it in a paragraph.
A periodontal kit should provide an exact bill of materials. Buyers may need a hygiene-focused scaler/curette set, a Gracey assortment, a universal curette selection, or a broader periodontal surgery kit. Those are different compositions. Send the desired patterns, quantities, handle, cassette, marking, and packaging for a custom quote.
Inspection, Sharpening, and Reprocessing
Reusable periodontal instruments need regular inspection for working-end damage, corrosion, loose handles, and loss of edge where the design is intended to be sharpened. Ask for the relevant care information with your quotation. Product-specific instructions and the healthcare facility protocol remain controlling.
For wholesale and private-label orders, provide the family, pattern, figure, handle, quantity, packaging, marking, and destination. We can discuss approved samples, material and finish declarations, quality documentation, and repeat-order controls as part of the quotation.
What Can Be Confirmed Before You Order
We hold ISO 9001:2015 quality management certification, confirmed for the exact product range on request in your quotation enquiry.
Sialkot production workflow
Material selection, forming, heat treatment where required, grinding, finishing, inspection, marking, and export packing.
Material02Grade confirmed by SKU
Material and applicable steel grade are confirmed against the quoted pattern instead of applying one grade to every instrument family.
MOQ03Order-type minimums
Samples: 1-3 pieces per pattern; standard product orders: confirmed with your quote; mixed wholesale: 25 instruments (mixed patterns); OEM: 25 pieces per pattern.
Packaging04Protective and branded options
Individual pouches, procedure sets, cassettes, protective bulk cartons, product labels, and approved private-label packaging.
Export05Documented dispatch
Commercial invoice, packing list, protective outer packaging, and courier or freight tracking appropriate to the order.
Learn More About Periodontal Instruments
Helpful guides related to this category, product selection, instrument names, and sterilization workflows.
Dental Scaler Types and Selection Guide
Compare dental scaler types including anterior and posterior sickle, H6/H7, Jacquette, 204S, Morse, U15, hoe, periodontal file, and implant-maintenance patterns.
Read GuidePeriodontal Probe Types and Markings
Compare periodontal probe types and markings, including Williams, UNC-15, Marquis, WHO/CPI, and Nabers probes, and learn which measurement task each pattern supports.
Read GuideHow to Sharpen Dental Instruments
How to sharpen dental instruments: choosing sharpening stones, maintaining the correct bevel angle for curettes and scalers, testing sharpness, and sterilizing after sharpening.
Read GuidePeriodontal Instruments FAQ
What is the difference between a dental scaler and a curette?
Scalers and curettes have different working-end geometry. Sickle scalers have a pointed toe and triangular cross-section; curettes have a rounded toe and semicircular cross-section. The exact pattern and intended professional use should guide selection.
How do Gracey and universal curettes differ?
Gracey curettes are area-specific and selected by pattern number and surface access. Universal curettes have two cutting edges and are adapted across multiple surfaces. They should remain separate collection intents.
What information is needed for a periodontal instrument quote?
List the family, pattern or figure, working-end size where known, handle, quantity, kit or cassette needs, marking, packaging, and destination.
Can periodontal instruments be supplied as a custom set?
Yes. Submit a written bill of materials with each instrument pattern and quantity. The set can then be reviewed for handles, cassette, packaging, and private-label requirements.
Need Periodontal Instruments in Bulk?
Send your instrument list and quantities for manufacturer-direct pricing, custom branding, or mixed-category quotes.